Brake fluid tester pen With 5 LED display

Description: 

Brake fluid detection pen is based on the change in conductivity to determine the moisture level in the brake fluid. It shows clearly the extent of moisture contained with the 5 LED lights, high moisture content will lead to lower boiling point, affect braking performance.

Red indicates the brake fluid needs immediate replacement, Green represents good condition, Yellow indicates the state is acceptable but soon replaced.

  •  the green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified
  •  the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
  •  the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced Red LED: change brake fluid
  •  LED red flashing: battery replacement 5, LED yellow: low moisture content, check again in six months 6, LED green: brake fluid lines / cell row

Image: 

Catalog: 

Price: $19.99
Zircon - This is a contributing Drupal Theme
WeebPal